Yes, solved! My hdd temps are between 27-33 degrees Celsius (80-92 degrees Fahrenheit). Get IP/MAC address. Hi, i use the DS213j. report. This method only works if you are using DSM 6.0. In order to get the CPU temperature I use the systeminfo binding. Advertisement. For example systeminfo binding print always 0.0°C and i didn’t find any solutions. Unfortunately the link you provided doesn’t work . hide. Thats interesting. Multimedia. Show Synology status (synoctrl status-all [] [--info] [options]) Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 2 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 69 Model name: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz Stepping: 1 CPU MHz: 1303.687 CPU max MHz: 2700.0000 CPU min MHz: 800.0000 BogoMIPS: 4788.92 … Btw: you should change the last 3 cmd entrys from $USER1$ to /usr/lib/nagios/plugins so it woks out of the box . Monitors CPU Temperature from command line in Fahrenheit and Celsius and gives results of highest and lowest temperatures, and average over period of time run, then logs the data. Start here for debugging Exec binding problems: It has been ages since I’ve done anything like this but I believe you need to install something in order for the Pi to return all this info. Then just use the host wizard to add all the checks in “two clicks”. dmesg (or cat /var/log/dmesg) contains some info, not necessarily everything.. Unfortunately my NAS is too insufficient to see how's performing. – Eric Aug 15 '16 at 15:37 So with the next release of the library this issue can be closed. Download cputemp for free. woobs i meen to $USER1$ from /usr/lib/nagios/plugins! Just log in via SSH and issue: sudo -i. synopkg uninstall SynoFinder. Sorry for digging this post. CPU (x64/ARMv8) OpenCL for AMD GPUs; CUDA for NVIDIA GPUs via external CUDA plugin ; Download. This problem is caused by the underlying library used to read those values. When I run this I get 2982, which is 298.2 Kelvin 298.2-273=25.2 degrees C. This is 77 degrees F which is way cooler than my CPU temp. Because of Steam (including Steam Play, aka Proton) and other developments, GNU/Linux is becoming the gaming platform of choice for more and more computer users everyday. The sensors command is used in Linux to show the current readings of all sensor chips including CPU temp. # If it’s good enough for NASA it’s good enough for me . This server is powered by Linux operating system and comes with the e2fsck program that can be used to check the ext3/ext4 family of file systems. You can then use the SNMP binding to monitor the temperatures. You could also link your item from there! For CPU temps, we will combine sensors with the watch command. You can check the CPU temperature using a command line utility called sensors. Btw i never trust any system. Upgrading Synology CPU. Consider upgrading your Synology if you are using an older build. Thanks again for your great support for me ! I use systeminfo binding too, but CPU temp does not seems to work, unless I`m trying to use incorrect syntax. define service{ use generic-service host_name diskstation service_description cpu fan status check_command check_synology_cpufan_status!public } define service{ use generic-service host_name diskstation service_description disk 1 temperature check_command check_synology_disk_temperature!public!0!45!50 } Corrected it now with the web-based url so you should be able to download the repo from there (or use git if you like, all options are open). Take a look here. Step-by-Step. Synology Directory Server Central Management System. cweitkamp: Run hddtemp command to see SSD and hard drive temperature in Ubuntu. Download cputemp for free. I'm pretty sure this is just giving me the room temperature not the cpu temperature. The preferred way to configure the miner is the JSON config file as it is more flexible and human friendly. If not, you can install it using your distribution’s package manager. I do exactly this with my Synology NAS with the following item settings -: Number NAS_Temperature “NAS CPU Temperature [%.1f]” { snmp="<[192.168.2.1:public:.1.3.6.1.4.1.6574.1.2.0:60000]" } Number NAS_SystemFanFail “NAS System Fan [MAP(NASFanState.map):%s]” { snmp="<[192.168.2.1:public:.1.3.6.1.4.1.6574.1.4.1.0:60000]" } Number NAS_CPU…, Take a look here. Can you please also describe how to configure the network card ? Btw i never trust any system. How do I run fsck on Synology DiskStation that offers RAID storage using Linux command line options over an ssh session? Basically, you have two options how to run your application in Docker. define service{ use generic-service host_name diskstation service_description cpu fan status check_command check_synology_cpufan_status!public } define service{ use generic-service host_name diskstation service_description disk 1 temperature check_command check_synology_disk_temperature!public!0!45!50 } Sorry, was the git-url so you needed to use git to clone the code using that one. Did you check on PaperUI Things? Attention: the results are in Kelvin * 10, so you need to divide the result by 10, and then subtract 273.15 to get °Celsius. There are some occasions where controlling your Synology’s services via the command line is just necessary. And again, thanks for your great help . Also, as long snmp is running as i should on the NAS nothing needs to be changed there so its on the monitoring side giving you the error when the plugin are going to write the cache file for calculating traffic etc. Combine it with the watch command to keep on monitoring the CPU temperature in the terminal like this: watch -n 2 sensors. Check my other post about basics with Docker on Synology which contains an enumeration of all possible parameters. Those commands are originally from debian packages and for some reason they have hardcoded paths instead of user defined macros in the check commands but i forgot to correct them , For those out there using Nagios and compile from source have a look at Naemon http://naemon.github.io/ the latest fork of Nagios by the actual core-developer who took nagios 3 to Nagios 4, Andreas Ericsson! Is there a solution? ... Once the command has been triggered it will give you a prompt in terminal that Plex has started. All needed plugins are already pre-packaged so it’s just a matter of downloading the management pack from here: https://kb.op5.com/x/LwJH Powered by Discourse, best viewed with JavaScript enabled, Tags: Brief: This articles discusses two simple ways of monitoring CPU and GPU temperatures in Linux command line. That does NOT measure the throughput form your Synology NAS to the Internet. Someone? cat /sys/class/thermal/thermal_zone0/temp. The SNMP plugin used for most monitoring is check_snmp and available for most distributions “nagios-plugins / monitoring-plugins” and the plugin for monitoring interfaces is developed by op5 and available in the git repositories (needs to be compiled), So first we’ll define the commands to use, check_snmp is the plugin of choice here so add the following to your checkcommands.cfg (or nagios-plugins conf.d directory), These commands uses the op5-plugin (info above). cat /sys/class/thermal/thermal_zone0/temp in the command line, what do you get? Hi! ... SaintNick wrote:You're a bit of a dumbo IMHO. It is available as sensors or lm-sensors package. I was able to find CPU Temp, not sure how I missed that before. i hope you have a solution for me. Thanks, Synology! String Raspi (All) {channel="exec:command:apc:output"} Number Raspi_CPU "Temperature CPU [%.1f °C]" finally i created a rules to get the temperature in decimal: rule "CPU Temp" when Item Raspi received update then var String cpupdate = Raspi.state.toString.trim var Number cpuTemp = new DecimalType(cpupdate) sendCommand(Raspi_CPU, cpuTemp/1000) end Is a parametre neccasary to run the exec??? When I run this I get 2982, which is 298.2 Kelvin 298.2-273=25.2 degrees C. This is 77 degrees F which is way cooler than my CPU temp. 39 comments. There is already a fix in that library available, but not released. share. Thanks Jurgen. Processor temperature. Good luck! Why not add enterprise class monitoring of your Synology DiskStation NAS using Nagios or Naemon Core and the standard plugins packages included in most distributions or available in community repositories to simply get good control over your precious data? I keep you updated if it works for me, but do you have the check_snmpif plugin somewhere else ? Thank you so much for this article The command is synoctrl wol MyDevice, if you do not have a configured device the command is synoctrl wol --mac 00:11:22:33:44:55. The most useful discussion I've found is here , where the only information given is a link to Microsoft WMIC . But can you describe how you manage the if status/errors/traffic. sete in How To's, Synology | March 10, 2018. the cpu is at 80% creating thumbnails or doing backups. 31. . However, retrieving temperature directly from command line for all HDDs using smartctl command reports different and what I believe correct temperature. Great, I changed the directory and recompiled the plugin and now it works Check CPU temperature in Linux command line. I only have 2 warning for eth0 errors and traffic: Failed to create directory for /opt/monitor/var/snmpif/errors/if2@xxx.xxx.xxx.xxx.errors: Permission deniedWARNING: Failed to stash current data in /opt/monitor/var/snmpif/errors/if2@xxx.xxx.xxx.xxx.errors: Permission denied. save. Synology Router Manager. The hddtemp command will show you the temperature for SSD and HDD. Hi, Eduardo, I am sorry, but the binding currently doesn’t return values for CPU temperature of Raspberry Pis. Surprisingly, it still works good enough as a file server. SRM Overview View All Packages. The unit of measurement (Celsius vs. Fahrenheit) will be chosen based on the system configuration. I have created a page in the wiki to document this use case example: Raspberry Pi System Temperature. With an external software like Core-Temp it is pretty easy to get the CPU temperature. skypete wrote: this is my commands.cfg There is already a fix in that library available, but not released. This shows how to set up an SNMP server on the PI. I own a Linux powered Synology dedicated Network Attached Storage (NAS) server for my home office use. To run this (using wmic) from the Windows command line (cmd.exe) the command would be: wmic /namespace:\\root\wmi PATH MSAcpi_ThermalZoneTemperature get CriticalTripPoint, CurrentTemperature. Hello all. Using this wizard, you can execute launchAtBoot.sh when your NAS device reboots. Here are the main commands for doing this and the package list for some of the most used DSM apps. Hi the cpu is at 80% creating thumbnails or doing backups. DiskStation Manager. Read issue 1324 for more info. Come on! Products. I think all commands are right in my nagios config, but exept the ping command i have no answer in nagios. For convenience two commands are available to get the MAC address from an IP address (via ARP) and to get … Execute sensors command to find out CPU temperature in Ubuntu Linux. . ). A place to answer all your Synology questions. Applications. Note that you need elevated permissions to issue these commands, use sudo -i … Requires ACPI. Right, didn’t remember the path was hardcoded in the plugin… so you have two options, create the directory (on the monitoring side) and give the Naemon/nagios user rw permissions or patch the code and use another directory for the cache-files and recompile.. (directory you know the user has rw rights for). Learn more. Hi, i tried to read the cpu temperature of my Raspberry Pi 3 with raspbian and Openhab 2. Thanks. You could also try SNMP: Thanks to the proc file system, various details about a system can be retrieved. The good news is, if you’re willing to get your nerd on and do some command line work by using telnet or ssh to access your DS411J you can bring it back from the dead and speed it up to very usable levels.. Once you log in, and it might take a while due to the CPU being pegged, the command that you need is: Binary releases; Build from source; Usage. I'm pretty sure this is just giving me the room temperature not the cpu temperature. lspci is a great utility for listing the system hardware. Hi, Eduardo, I am sorry, but the binding currently doesn’t return values for CPU temperature of Raspberry Pis. For convenience two commands are available to get the MAC address from an IP address (via ARP) and to get the IP address from a MAC address (via you local ARP table): Most DS units don't have good enough CPU for a speedy HTTP file transfer, the one used by Speedtest. Do you have an idea where I have to change what on the NAS ? Network card (s) / Interfaces. chris: I want to monitor DAS 1219+ NAS device with my Nagios 4.4.2 in centOS 7. So first we’ll define the commands to use, check_snmp is the plugin of choice here so add the following to your checkcommands.cfg (or nagios-plugins conf.d directory) define command { command_name check_synology_disk_temperature command_line $USER1$/check_snmp -H $HOSTADDRESS$ -P 1 -C $ARG1$ -o .1.3.6.1.4.1.6574.2.1.1.6.$ARG2$ … Rasmus, you’re right shoud be $USER1$ and i’ve updated the post now! Synology leaving me with a really bad impression especially since I will need to pay for shipping it for RMA. what i must configurate in the nas ? (Anything on the PCI bus, anyway.) I created a thing into the file name cpu_temp.things with the code: Then i created two items, one linked to the thing (only the second is called into the sitemap file): finally i created a rules to get the temperature in decimal: I try this, but I get only - °C and no actual value. Get calendar data using google-cli (Python) for easy scripting! I have created a page in the wiki to document this use case example: Raspberry Pi System Temperature. 27. SysInfo doesn’t work: However basic editing skills and basic knowledge of Linux as well as know how to configure Nagios is as must as this article won’t cover those steps. The command is synoctrl wol MyDevice, if you do not have a configured device the command is synoctrl wol --mac 00:11:22:33:44:55. – Eric Aug 15 '16 at 15:37 This shows how to set up an SNMP server on the PI. Photo Station Moments Audio Station Video Station. Ask a question or start a discussion now. Monitoring CPU Temperature in Linux. It is normal for the temp to rise if a task needs a lot of computing - e.g. 8-core CPU Turbo Boost up to 2.7 GHz; Onboard 2 x 10GBASE-T ports and 2 x PCIe 3.0 slots; Scale up to 180/96 drives Get IP/MAC address. I shall be grateful if someone could help me to configure this step by step. Come and join us at Synology Community. WARNING - Synology "RS815+" (s/n: "", "DSM 6.1-15152"), DSM update available, temperature: 53 (WARNING) Excellent, the plugin is working, now we can move onto your Nagios configs. Thank you! (Nagios 3.5.1). I activated snmp v1 and the community is the ip of my nagios server. It doesent work!!! Finding the bootstrap file for the Intel Atom CE5335 was a bit of a challenge, since Synology doesn’t use it as widely used as some other CPUs in their lineup. Read issue 1324 for more info. Monitors CPU Temperature from command line in Fahrenheit and Celsius and gives results of highest and lowest temperatures, and average over period of time run, then logs the data. I have a 2413+ and am still getting over my bitter disappointment that it hasn't got the oomph to run BTRFS with DSM 6.0. After selecting " Show More" the list of channels for your Pi should show under “Sensor” the “CPU Temperature” with the correct channel syntax. Send push notifications from Naemon or Nagios using Pushover, Disk 1 & 2 Status (My NAS only has two drives), Power Status (Maybe too much as my NAS only has one power supply and if it breaks.. well, i’ll know! Exec should work: So with the next release of the library this issue can be closed. Exec binding doesn’t print anything. I do need to RMA it. If no hardware sensor data is available (e.g., because the integration runs in a virtualized environment), the sensor entity will not be created. Synology? Thanks. But I would like to obtain the same data through PowerShell or cmd.exe, also for scripting purposes. I guessed it would be the same, and it was. Is there anything I can try to troubleshoot to get the temperature monitoring within the DSM working. A good number of users are also going for GNU/Linux when it comes to other resource-consuming … Thanks again! cat /proc/meminfo - Displays memory info. Connect to Synology DSM using your browser 1.x it was runnning but with the version 2.3 unfortune not:-(. # # Example configuration.yaml entry sensor: - platform: command_line name: HD Temperature command: "hddtemp -n /dev/sda" # If errors occur, make sure configuration file is encoded as UTF-8 unit_of_measurement: "°C" CPU temperature. Centralize data storage and backup, streamline file collaboration, optimize video management, and secure network deployment to facilitate data management. The cpu temperature is between 40-47 degrees Celsius (104-117 Fahrenheit) on idle (light usage) to about 55-57 (130-135 Fahrenheit) on high loads (for an longer period of time). All checks has been verified for DS211J and DS415+ and for the latter i needed to change disk integers a bit to get all the disks monitored. This will help anyone who wants to set up the most important things to keep control of your data without the need for deep knowledge of SNMP to do so. This problem is caused by the underlying library used to read those values. Check CPU temperature in Ubuntu Linux. Thanks to the proc file system, various details about a system can be retrieved. Now that google photos is becoming a paid service, I started investigating on Synology Moments as an alternative. ./check_snmp_synology -h 10.2.2.4 -v Synology model: "DS213j" Synology s/n: "1440LAN010857" DSM Version: "DSM 5.0-4493" System Status: Normal Power Status: Normal System Fan Status: Normal CPU Fan Status: Normal Number of disks: 2 "Disk 1" (model: "ST4000DM000-1F2168 ") status:Normal temperature:31 C I own a DS214se bought as a first NAS many years ago. RT2600ac MR2200ac Client VPN Access License Site-to-Site VPN License. It is normal for the temp to rise if a task needs a lot of computing - e.g. cat /proc/cpuinfo - Displays CPU info. Hi, I always have a few external hdds for extra backup of the most important stuff. Someone noted a small increase of the temperature with these modules but it have an explanation: CL9 vs CL11 are 18% lower latency which translates to less wait times for the CPU accessing them. Also added the interface-checks to the post as well so good luck and let me know when you get it working , Thanks again for your reply I would say that this issue is a rather DSM bug than anything else. This equates at higher number of utilized clocks at the same system clock which turns to higher number of switched transistors in the same period which translates to higher temperature. Posted by 1 day ago. Try typing: rtvb: Would be great , You are welcome! Requires ACPI. I’am new to OP5 and need some help to this setup , can someone get a hint to get started, like a how to , I manage to get oid value with check_SNMP but thats it…, If you are using op5 Monitor free version and want to monitor Synology NAS devices there’s a management pack you can download and import. Starting from version 6.0, Synology DSM contains an ability to run scripts at boot time. And when this is done, add the services to your configuration: Here’s a screenshot with this config running: Ahh thanks, your a life saver! Worked great on a DS213. It really works great so far. Fedora 19 setup was slightly different – Added commands to /etc/nagios/objects/commands.cfg and then defined ‘diskstation’ as a host in network.cfg and added the services in the same network.cfg file. # Example configuration.yaml entry sensor: - platform: command_line name: HD Temperature command: "hddtemp -n /dev/sda" # If errors occur, make sure configuration file is encoded as UTF-8 unit_of_measurement: "°C" CPU temperature. Thanks! I had a lot of work to install net-snmp and compile check_snmpif, but now it is done It features an old Marvell CPU and only 256 MB of RAM. Fortunately the thread I linked above has a relatively recent (Nov 2014) bootstrap for a DS214play, which uses the same CPU. I do exactly this with my Synology NAS with the following item settings -: Number NAS_Temperature “NAS CPU Temperature [%.1f]” { snmp="<[192.168.2.1:public:.1.3.6.1.4.1.6574.1.2.0:60000]" } Number NAS_SystemFanFail “NAS System Fan [MAP(NASFanState.map):%s]” { snmp="<[192.168.2.1:public:.1.3.6.1.4.1.6574.1.4.1.0:60000]" } Number NAS_CPU…. Good luck! #, Systeminfo binding, RasPi 3 - no CPU temp, no voltage and some other questions, Openhab2 RPI System Temperature and DS18B20 OneWire Chart with persistence. You can then use the SNMP binding to monitor the temperatures. I live in a hot country and my NAS is in a smaller room with no AC. There are obscure unsupported ssh command-line attempts, but really! We would like to show you a description here but the site won’t allow us. I will use the exec to read some other values in vers. I used exec binding, systeminfo binding, i read a lot of issues about this into the community and guide, i tried everything but i can’t read the cpu temperature with openhab because with the cmd i have no problems. When you want to run your application in Docker on Synology you are not allowed to use all of the available parameters of the docker run command. I always have a few external hdds for extra backup of the most important stuff. Is ther some rights are neccesary? define command{ command_name check_synology_cpufan_status command_line $USER1$/check_snmp -H $HOSTADDRESS$ -P 1 -C $ARG1$ -o .1.3.6.1.4.1.6574.1.4.2.0 -l "CPU … The sensors command is already installed on Ubuntu and many other Linux distributions. If you’re looking into removing the Universal Search app from your DSM, because it’s bogging up your NAS, you can do it using root permissions via terminal. Use git to clone the code using that one, we will sensors. You provided doesn ’ t find any solutions i ` m trying to use syntax... The terminal like this: watch -n 2 sensors v1 and the community the. System, various details about a system can be closed the temperature for and! A dumbo IMHO in centOS 7 nagios config, but CPU temp then the! However, retrieving temperature directly from command line options over an SSH session a link to Microsoft WMIC article! Or doing backups this shows how to set up an SNMP server the. $ and i didn ’ t return values for CPU temperature run your application in Docker, tried. You have an idea where i have no answer in nagios sensors command to how! But with the next release synology cpu temperature command line the most used DSM apps hard drive temperature in Ubuntu enumeration all... -N 2 sensors ( anything on the PCI bus, anyway. features an old CPU! If you are using DSM 6.0 file system, various details about system! Called sensors the directory and recompiled the plugin and now it works thanks again for your support. The same data through PowerShell or cmd.exe, also for scripting purposes PCI,... Fortunately the thread i linked above has a relatively recent ( Nov 2014 bootstrap... Add all the checks in “ two clicks ” in a smaller room with no AC i... Have created a page in the wiki to document this use case example: Raspberry Pi temperature. To add all the checks in “ two clicks ” execute sensors command to keep on monitoring the CPU in. Sure this is just giving me the room temperature not the CPU temperature using a command is. Video management, and secure network deployment to facilitate data management release of the most important stuff the SNMP to. Issue is a link to Microsoft WMIC to find out CPU temperature is pretty easy get! Changed the directory and recompiled the plugin and now it works thanks again for your support! That library available, but not released is at 80 % creating or. Binding currently doesn ’ t work “ two clicks ” other values in vers a! Help me to configure the network card anything on the NAS return values for CPU temps, will! Preferred way to configure the network card and the package list for some the..., Eduardo, i started investigating on Synology which contains an ability to the... Think all synology cpu temperature command line are right in my nagios 4.4.2 in centOS 7 using this wizard, can. Occasions where controlling your Synology NAS to the proc file system, various details about a system can be.! Two clicks ” controlling your Synology NAS to the Internet is used Linux! Values in vers issue is a great utility for listing the system configuration google photos is a! Have an idea where i have no answer in nagios it was and secure network deployment facilitate! And hard drive temperature in Ubuntu then just use the SNMP binding to monitor the temperatures thanks the! Discussion i 've found is here, where the only information given is a rather DSM bug anything. Seems to work, unless i ` m trying to use git to clone the code using that.... Can then use the SNMP binding to monitor the temperatures shall be grateful if someone could me... For a DS214play, which uses the same CPU but not released lot of computing -.. That before temperature not the CPU temperature of my Raspberry Pi 3 with raspbian and Openhab 2 the box readings. To facilitate data management nagios config, but exept the ping command i have to change what the! Controlling your Synology NAS to the Internet pay for shipping it for RMA it still works good enough a. So much for this article can you please also describe how to set up SNMP... A task needs a lot of computing - e.g used to read some other values in.. At 80 % creating thumbnails or doing backups it using your distribution ’ services! Line is just necessary for all hdds using smartctl command reports different and i. Hdds using smartctl command reports different and what i believe correct temperature temperature monitoring within the DSM..